Transform Your Space with an IKEA RITVA Curtain Hack

Looking to upgrade your home’s style without breaking the bank? An easy IKEA curtain hack using the popular RITVA curtains can elevate any room. With just a few simple steps, you can create beautifully tailored curtains that look high-end and custom.

Let’s take a look at the IKEA RITVA Curtain hack shared with us by @mcinnishome. This creative twist on IKEA curtains resulted in stunning panels that elevate the room’s style.

So how did she make it? We’ll review what was shared in the video so that you can recreate this IKEA hack yourself.

Let’s dive into the materials required, step-by-step instructions, and pro tips to ensure curtain perfection.

Materials Needed for the IKEA RITVA Curtain Hack

To complete this project, you’ll need:

  • IKEA RITVA curtains in your preferred size and color
  • Iron and ironing board
  • Hemming tape
  • Scissors
  • Measuring tape

The RITVA curtains are an inexpensive base to build upon. Focus on choosing a length and color that fits your space.

Step-by-Step Instructions for the IKEA Hack

With your supplies gathered, you’re ready to start the easy DIY curtain upgrade. Follow these steps:

Pleat the Curtains

  1. Grab a pleat on the curtain.
  2. Count five spaces over and make a new pleat.
  3. Repeat this process, pleating every five spaces across the entire curtain.

This tailored pleating instantly adds polish.

Hem the Curtains

  1. Once pleated, measure how much length needs to be removed.
  2. Fold the curtains at this measurement and iron to create a crease.
  3. Apply hem tape inside the fold and iron again to seal.
  4. Trim off any excess material above the hem.

Hemming the pleated curtains gives them a custom finish.

Hang Your New Curtains

The final step is hanging your upgraded IKEA curtains on the rod to enjoy their transformed look.

And that’s it! In about an hour, you can take basic IKEA curtains to the next level.

Designer Tips for IKEA RITVA Curtain Perfection

Follow these extra tips from interior designers for professional-looking results:

  • For 9-foot ceilings, buy 118-inch curtains and remove 13 inches during hemming.
  • Double-check all measurements before cutting to avoid mistakes.
  • Use high heat and steam when ironing for crisp pleats.
  • Hang curtain rods wider than the window to create a luxurious effect.
  • Add tie-back curtains or decorative holdbacks for an elegant touch.


With this simple IKEA hack, you can inexpensively upgrade any room in your home. The tailored RITVA curtains add style and sophistication with just a little DIY work. Good luck!

Share the Post:

Visit the IKEA Hack Directory

Find the best ideas, products, and resources to nail your next IKEA Hack.